What Is a "Face Hole" on a Massage Table Cover? (Sizing & Fit Guide)

November 20, 2026
8 min read
London Linens fitted sheet and face cradle cover on a massage table

A face hole is an opening near the head end of a massage table. It lets a client lie face down and breathe freely. 

A massage table cover with face hole has a matching opening, so the fabric does not block it. You only need one if your table has a hole built into its top. 

Tables with an attachable face cradle work differently. They use a standard fitted sheet plus a separate face cradle cover. This guide shows which setup you have and how to measure for it. 

The Short Answer 

  • Your table has a built-in hole: buy a cover whose hole matches its size and position 

  • Your table has a face cradle: use a standard fitted sheet plus a face cradle cover 

  • Before you buy either: measure the table, the pad depth, and the hole or the cradle pillow 

What Is a Face Hole? 

A face hole is a cutout in the padded table top near the head end. Sellers also call it a breathing hole, breath hole, or face opening. 

It lets a client lie face down without turning the head to the side. Natural Living, a UK supplier, notes that some tables have a built-in hole while others use an adjustable cradle. 

Some tables have more than one cutout. Brookstone lists its Luxton memory foam table with a face hole in the middle. It also lists breast holes 16 cm (6.29 inches) across. 

Face Hole vs Face Cradle Side by side: a bed with a built-in face hole and a table with a face cradle

 

Built-in face hole 

Face cradle 

Where it is 

Cut into the padded table top 

A separate headrest at the head end 

How it attaches 

Part of the table 

Usually slides in on two dowels 

Adjustable 

No, the position is fixed 

Often adjusts for height and tilt 

Cushion 

The table pad itself 

A pillow, usually U-shaped, 3 to 4 inches thick 

Sheet you need 

A cover with a matching face hole 

A standard fitted sheet 

Extra cover 

No separate pillow to cover 

A face cradle cover for the pillow 

The cradle details come from MASSAGE Magazine, which says face pillows are almost always U-shaped. It also advises checking the dowel size and spacing before buying a cradle. 

Which Tables Have a Face Hole? 

Face-hole covers on Amazon are mostly marketed for beauty salon and spa beds. Several, such as this TOVINANNA cover, list a 70 x 190 cm size. 

Some home massage tables have a hole too, like the Luxton table above. Many portable tables use an attachable face cradle instead. 

To check yours, look at the head end of the table top. A cutout in the pad means a face hole, while a headrest on dowels means a face cradle. 

Working on a spa or facial bed? See whether massage sheets fit spa tables, and read our facial table sheets buyer's guide. 

How to Measure for a Massage Table Cover With Face Hole?

You need six measurements and a tape measure. The letters match the diagram below. 

 

Measure the table, the pad depth, and the face hole's size and position. 

  1. Measure the table top: Measure the width (A) and the length of the padded top in inches. 

  1. Measure the pad depth: Measure from the top surface to the bottom edge of the pad (F). The cover has to wrap under it. 

  1. Note the head-end shape: Check whether the head end is square or rounded. Face-hole covers are sold in both shapes. 

  1. Measure the face hole: Measure its width (B) and length (C) at the widest points. Note whether it is round or oval. 

  1. Measure the hole position: Measure from the head edge to the hole's top (D) and to its center (E). 

  1. Convert to centimeters: Many face-hole covers list sizes in centimeters, so multiply each inch figure by 2.54. 

  1. Compare before you order: Match the table size, hole size, and hole position to the listing. Ask the seller if any figure is missing. 

Our massage table sheet size guide covers table measurements in more detail, with common sizes in inches. 

How to Match a Cover to Your Table 

Table Size 

Several face-hole covers list 70 x 190 cm, which is about 27.6 x 74.8 inches. Check the stated width range, not just the cover size. 

For example, one eBay listing says its 70 x 190 cm cover fits beds up to 80 cm wide. That is about 31.5 inches. 

Hole Size 

The cover's hole should be at least as large as your table's hole. A smaller hole leaves fabric over part of the opening. 

That same eBay listing gives an 11 x 16 cm opening, about 4.3 x 6.3 inches. Many listings give no size, so ask the seller. 

Hole Position 

The opening must sit over your table's hole when the cover is pulled tight. Compare the listing's distance from the head edge with your own measurements D and E. 

Vague wording is a warning sign. One Walmart listing only calls its hole "strategically placed," with no position or size. 

Head Shape 

Covers come in square head and round head versions. See this square head cover and this round head cover. Match the shape of your bed's head end. 

Fabric and Care 

The face-hole covers we found list polyester, polyester cotton, or a cotton blend. Check the care label against your state's linen rules before you buy. 

Texas requires washing used linens in chlorinated bleach and hot water. Pennsylvania requires hot water, detergent, and bleach after every use. 

For a full routine, see our guide on how to wash massage table sheets. 

If Your Table Has a Face Cradle Instead 

With a face cradle, you need a fitted sheet for the table and a cover for the cradle pillow. The sheet does not need a hole. 

Measure the cradle pillow, not the table. For example, Saloniture lists its face cradle pillow at 10.5 x 10.5 inches and 3 inches thick. Its face opening is 3.5 x 6 inches. 

Face cradle covers slip over the pillow and hold with elastic edges. Our microfiber face rest cover fits oval and horseshoe cradles. Its page lists cradles about 10 to 12 inches wide and 10 to 13 inches tall. 

Change the Cover for Every Client 

Treat the cradle cover like a sheet. Texas and Pennsylvania both require clean linens for each client. 

Washington also requires face cradles to be covered with impervious material under the linens. That material must be disinfected after each use. 

So keep enough cradle covers for a full day of sessions. Our guide on how many massage sheet sets you need helps you plan a rotation. London Linens face cradle cover stretched over a U-shaped cradle pillow

Where London Linens Fits 

We do not make a sheet with a face hole. Our sheets and covers are made for tables that use a face cradle. 

If your table has a built-in hole, our fitted sheet will cover it. In that case, use the steps above to find a cover with a matching hole. 

If your table has a face cradle, here is what we offer: 

  • Each set includes: a 61 x 100 inch flat sheet, a fitted sheet, and a face cradle cover 

  • Fitted sheet size: 36 x 78 inches with a 7.5 inch drop 

  • Fit: elastic all around, made for cradles padded with fleece or memory foam 

Frequently Asked Questions 

What is a face hole on a massage table cover? 

A face hole is an opening in a cover that lines up with a breathing hole in the table. It lets a client lie face down and breathe without fabric blocking the opening. You only need one if your table has a hole cut into its top. 

Do all massage tables have a face hole? 

No. Some tables have a hole built into the padded top. Others use an attachable face cradle at the head end. Look at the head end of your table or check its product page. If you see a separate headrest on dowels, you have a face cradle. 

How big is the face hole on a massage table cover? 

It varies by product, so measure your own table first. One cover sold online lists an 11 x 16 cm opening, which is about 4.3 x 6.3 inches. Many listings give no hole size at all. If yours does not, ask the seller before you order. 

Can I use a regular fitted sheet on a table with a face hole? 

You can, but it will cover the opening. Clients then breathe through the fabric when they lie face down. To keep the hole open, buy a cover with a face hole sized to your table. 

What size face cradle cover do I need? 

Measure the face cradle pillow, not the table. MASSAGE Magazine notes that most pillows are U-shaped and 3 to 4 inches thick. London Linens microfiber face rest covers fit oval and horseshoe cradles. Those are about 10 to 12 inches wide and 10 to 13 inches tall. 

How often should I change a face cradle cover? 

Change it for every client, just like your sheets. Texas and Pennsylvania require clean linens for each client. Washington also requires face cradles to be covered with impervious material that is disinfected after each use. Keep enough covers for a full day of sessions.

Back to News